Setting The Clock / Fm Radio - iHome iBN10 Instruction Manual

Setting the Clock
The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an
hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the
DST Switch to +1 to add an hour or to -1 to subtract an hour.
1. Press the Display/Clock Adjust Button located on the back of the unit. The clock display flashes and
a beep sounds, indicating clock setting mode.
2. Press the or
Make sure you set the correct AM/PM time. The PM indicator appears to the left of the display.
3. To toggle the clock display between standard 12 hour time and 24 hour ("military") time display,
press the Mode Button during time setting while time digits are flashing.
4. Press the Display/Clock Adjust Button to confirm the time and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
FM Radio
Extend the FM antenna for best reception.
Button on the unit to turn it on.
1. Press the
2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio
frequency appear on the display.
3. Press the or
4. Turn the Volume Knob to adjust the volume on the unit.
5. When you are through listening, press the
Buttons to adjust the clock to the current time (hold for rapid setting).
Buttons to tune the radio to the desired station (hold to scan for the next clear station).
Using the
Button to turn the unit off.
5
iBN10