Setting The Time; Setting And Using Alarms - iHome TIMEBOOST iBTW41 Manual

SETTING THE TIME

1. Press and hold the
for 2 seconds until the clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold
for rapid setting). Make sure you set the correct AM/PM time. The PM
indicator appears to the left of the display; there is no AM indicator.
3. To toggle the clock display between standard 12 hour time and 24 hour
("military") time display, press the
the display is flashing during time setting.
4. Press and release the
setting. The YEAR will flash on the display. Press the – or + Buttons
to set the correct year.
5. Press and release the
setting. The month will flash on the display. Press the – or + Buttons
to set the correct month.
6. Press and release the
month setting. The day will flash on the display. Press the – or +
Buttons to set the correct day.
7. Press and release the Time Set Button to confirm settings. 2 beeps
will sound to indicate time setting mode is complete.
DAYLIGHT SAVINGS (DST) SWITCH
This unit has a DST switch on the bottom of the unit to adjust the time
for daylight saving time and standard time. By default, it is set to Auto
and will automatically adjust the time at the start and end of daylight
saving time. If you wish to adjust manually, slide the switch to +1 to add
one hour or to –1 to subtract an hour.

SETTING AND USING ALARMS

This unit features dual alarms which can be set to different times and alarm
sources. Each is set in the same way. Instructions are given as "Alarm
Button"; use Alarm 1 Button or Alarm 2 Button to set respective alarms.
: Each step must be completed while display is flashing or setting will
time-out with any changes saved.
1. Press and hold the Alarm Button for 2 seconds until the alarm time display
and alarm icon flash. A beep sounds.
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold
for rapid setting). Make sure you set the correct AM/PM alarm time. The PM
Time Set Button located on the back of the unit
Alarm or
Time Set Button to confirm the current time
Time Set Button to confirm the current year
Time Set Button to confirm the current
Alarm Button while