Setting The Clock; Setting And Using The Alarm - iHome iBTW390 Instruction Manual

Setting the Clock

1. Press and hold the
clock display flashes and a beep sounds.
2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make
sure you set the correct AM/PM time. The PM indicator appears to the left of the display; there is
no AM indicator.
3. To toggle the clock display between standard 12 hour time and 24 hour ("military") time display,
press the Alarm or
4. Press Time Set to confirm the current time setting. The YEAR will flash on the display. Press the
– or + Buttons to set the correct year.
5. Press Time Set to confirm the current year setting. The Month will flash on the display. Press
the – or + Buttons to set the correct month (hold for rapid adjustment).
6. Press Time Set to confirm the current month setting. The Date will flash on the display. Press
the – or + Buttons to set the correct date (hold for rapid adjustment).
7. Press Time Set to confirm the date. 2 beeps will confirm time setting is complete.

Setting and Using the Alarm

This unit features dual alarms which can be set to different times and alarm sources. Each is set in
the same way. Instructions are given as "Alarm Button"; use
located on the back of the unit to set respective alarms. Note: Each step must be completed while
display is flashing or the step will time-out in 10 seconds without any changes saved.
1. Press and hold the Alarm Button for 2 seconds until the alarm time display and alarm icon flash.
A beep sounds.
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time. The PM indicator appears to the left of the time
display; there is no AM indicator.
3. Press the Alarm Button to confirm the alarm time setting. The wake-to schedule will flash. Press
the – or + Buttons to set the desired alarm schedule: 7 Days (every day), 5 Days (week days
only) or 2 Days (weekends only).
4. Press the Alarm Button to confirm the alarm schedule. The wake source indicator will flash on
the display. Press the – or + Buttons to select the wake to alarm source: "bt" (Bluetooth) or
tone. (Continued on next page...)
Time Set Button located on the back of the unit for 2 seconds until the
Alarm Button while the display is flashing during time setting.
Alarm Button or
4
Alarm Button