iBN27
QUICK BLUETOOTH CONNECTION GUIDE
PAIRING/CONNECTING YOUR NFC DEVICE WITH THE iBN27
PAIRING/CONNECTING YOUR BLUETOOTH DEVICE WITH THE iBN27
off | on
See examples below
of pairing on iPhone
and other devices
For iPhone
Turn on NFC and Bluetooth on your device (look
under Settings/Wireless & Networks)
Put your NFC device in audio play mode.
Turn on the iBN27, and then touch the NFC area on your
device to the
antenna area on top of the iBN27. If asked
to pair with "iHome iBN27", agree. A tone and solid light
confirm pairing.
Enjoy your music! To disconnect your device,
touch the
antenna area on top of the iBN27 again.
Turn on Bluetooth on your device and make it
discoverable (look under Settings/General).
Slide the Power Button on the back of the unit to the ON
position (right). The iBN27 will search for a connected device.
If device has not been paired/connected previously
to the unit, press and hold the
of the iBN27 for 2 seconds. The Bluetooth indicator will flash.
If "Not Paired", "Not Connected" appear on your
device or if asked if you wish to pair "iHome iBN27",
tap to select. If a password is requested, enter 1234.
Pairing Button on the back
For other
Printed in China
2/17/2014-0