Cable Routing - Yamaha YZF-R1P Service Manual

EAS00035

CABLE ROUTING

1 Headlight drain plug
È Make sure to securely insert
the coupler and boot.
É The headlight lead can be
routed by either of the head-
light or the boss. Do not catch
the headlight lead
assembling the front cowling.
Ê Do not make the lead stretch
too much.
Ë Secure the junction of the cord
headlight at the place of white
tape.
Ì Secure the junction of head-
light lead (including the head-
light leads and position lamp
leads) at the place of white
tape with the clamp behind the
pawl of headlight body.
Í To turn signal light
Î To main harness
when
Ï Route the junction of the head-
light, position lamp and turn
signal light leads through the
pawl on the headlight body.
(Pay attention to the direction.)
2 - 35
CABLE ROUTING
Ð Insert the headlight relay to the
rib of the headlight body. (No
special roder is specified for
right and left.)
Ñ Route
behind the cap of headlight
breather hole. (It can be routed
below, but should not be in
front of the cap.)
Ò To the auxiliary light lead
Ó To meter assembly
Ô To headlight relay
SPEC
the headlight lead