Installing The Engine - Yamaha YZF-R1P Service Manual

ENGINE
EAS00192

INSTALLING THE ENGINE

1. Install:
• engine mounting adjust bolts 1
• rear mounting bolts 2
• self-locking nuts 3
• left front mounting bolt 4
• right front mounting bolt 5
• pinch bolt 6
NOTE:
_
• Lubricate the rear mounting bolt threads with
lithium soap base grease.
• Do not fully tighten the bolts.
NOTE:
Use the pivot shaft wrench 7 to tighten the
engine mounting adjust bolt.
Pivot shaft wrench
YM-01471
2. Tighten the bolts in the following order.
Engine mounting adjust bolt 1
7 Nm (0.7 m · kg, 5.1 ft · lb)
Self-locking nut 3
50 Nm (5.0 m · kg, 36 ft · lb)
Left front mounting bolt 4
45 Nm (4.5 m · kg, 33 ft · lb)
Right front mounting bolt 5
45 Nm (4.5 m · kg, 33 ft · lb)
Pinch bolt 6
24 Nm (2.4 m · kg, 17 ft · lb)
3. Install:
• shift arm 1
NOTE:
_
• Align the punch mark a in the shift shaft with
the slot in the shift arm.
• Align the bottom edge of the shift pedal with
the mark on the frame-to-swingarm bracket.
5 - 7
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)