Checking The Shift Shaft; Checking The Stopper Lever; Installing The Shift Shaft - Yamaha YZF-R1P Service Manual

SHIFT SHAFT

CHECKING THE SHIFT SHAFT

1. Check:
• shift shaft 1
Bends/damage/wear → Replace.
• shift shaft spring 2
Damage/wear → Replace.

CHECKING THE STOPPER LEVER

1. Check:
• stopper lever 1
Bends/damage → Replace.
Roller turns roughly → Replace the stopper
lever.

INSTALLING THE SHIFT SHAFT

1. Install:
• shift shaft spring stopper 1
• stopper lever spring 2
• stopper lever 3
NOTE:
@
• Apply LOCTITE
shaft spring stopper.
• Hook the ends of the stopper lever spring
onto the stopper lever and the crankcase
boss.
• Mesh the stopper lever with the shift drum
segment assembly.
2. Install:
• shift shaft 1
• spacer
NOTE:
@
• Lubricate the oil seal lips with lithium soap
base grease.
• Install the end of the shift shaft spring onto
the shift shaft spring stopper 2.
5 - 50
ENG
22 Nm (2.2m · kg, 16 ft · lb)
®
to the threads of the shift