Warranty Considerations - Konica Minolta magicolor 2350 Installation Manual

Warranty Considerations

Various factors can affect a printer's warranty, such as electrostatic damage,
unsupported consumables, and other actions listed on the following page.
Read your printer warranty carefully. For information about your warranty, go
to printer.konicaminolta.net/support, then click on the Answer Base.
If KONICA MINOLTA printer failure or damage is found to be directly
attributable to the use of non-KONICA MINOLTA-approved consumables,
print media, and/or accessories, KONICA MINOLTA will not repair the printer
free of charge. In this case, standard time and material charges will be
applied to service your printer for that particular failure or damage.
These Actions Will Result in Voiding Your Warranty
Print Media
Electrostatic
Discharge
Instructions
Modifications
Consumables
OPC Drum
Cartridge and
Toner Cartridge
Accessories
Warranty Considerations
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
Use of nonsupported media, such as inkjet paper.
See "Using Media" in the User's Guide for
approved media. Contact your local vendor or
www.konicaminolta.net/printer/ for purchase information.
Failure to protect the printer controller board and any
associated daughterboard or module from electrostatic
discharge or damage while performing any task involving
the controller board.
Failure to follow instructions in the printer documentation.
Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for
compliance to Federal Regulations could void your
authority to operate this product within the Laws and
Regulations of the Federal Communications Commission.
Use of consumables not manufactured or supported by
KONICA MINOLTA. Any damage to the printer or quality
problems caused by a refilled toner cartridge use.
Any damage resulting from mishandling the OPC or toner
cartridge.
Use of accessories not manufactured/supported by
KONICA MINOLTA.
29