Installing Accessories; Plugging In/Turning On The Printer - Konica Minolta magicolor 2350 Installation Manual

Hide thumbs Also See for magicolor 2350:

Table of Contents

Adjust the media guides to fit the media.

Attention

Always adjust the media guides after inserting the media. Guides

that are not properly adjusted can cause poor print quality, media

jams, or printer damage.

Installing Accessories

Attention

Installing accessories always requires that the printer be turned off and

unplugged.

If you purchased any additional printer accessories (such as a duplex option

or additional memory), then install them now. If installation instructions are

included with the accessory, follow them. If not, instructions are included in

the User's Guide (in PDF on the Documentation CD-ROM).

Make sure the printer is turned off.

Plug the printer power cord into the printer

and into a dedicated, grounded,

surge-protected electrical outlet.

In compliance with UL guidelines,

"The appliance inlet is considered to

be the main disconnect device."

Installing Accessories

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Table of Contents