Table of Contents
Advertisement
Class A
This is a class B device, but with an optional Token-Ring or LocalTalk interface installed, it
changes to a Class A device.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at his/her own expense.
Canadian Users Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Laser Safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health
and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is completely confined within protective housings and
external covers, the laser beam cannot escape from the machine during any phase of user operation.
International Notices
Power Cord
The following power cord requirements are in effect for the 220v magicolor 2200.
Minimum
0.75 mm
Minimum
H05 VV - F
Voltage
Attention Norwegian users: This equipment is designed to operate within an IT power system
where the line-to-line voltage does not exceed 240v.
Lithium Batteries
Attention Swiss users: Lithium batteries need to be disposed of in accordance with Annex 4.1 of
SR814.013.
Warranty Considerations
Various factors can affect a printer's warranty. Two important ones are consumables
and electrostatic discharge. Read your printer warranty carefully.
26
2
The male plug is certified in the country in which the equipment is to be installed, and
the female plug is an IEC 320 connector.
Warranty Considerations
Advertisement
Table of Contents
