KTM 690 SMC R EU Owner's Manual page 105

13 WHEELS, TIRES
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Remove the rear wheel.
Main work
–
Check bearing
» If the bearing is damaged or worn:
–
Replace the bearings.
–
Check rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
601906-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check play
hand.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
601905-10
» If play
–
Change all rubber dampers in the rear hub.
Finishing work
–
Install the rear wheel.
–
Take the motorcycle off of the rear wheel stand. (
x ( p. 99)
.
1
x
of the rear hub for damage and wear.
2
, hold the rear wheel tight and try to rotate the rear sprocket with your
A
is larger than the specified value:
A
x ( p. 100)
p. 68)
≤ 5 mm (≤ 0.2 in)
p. 69)
103