KTM 690 SMC R EU Owner's Manual page 83

11 SERVICE WORK ON THE CHASSIS
0 A
0 0 0 B
1 2 3
A 0
Main work
–
Shift the transmission to neutral.
–
Check the rear sprocket and engine sprocket for wear.
» If the rear sprocket and engine sprocket are worn:
–
100132-10
–
Pull on the upper section of the chain with the specified weight
Guideline
Weight of chain wear measurement
–
Measure distance
Maximum distance
chain section
» If the distance
–
16 17 18
400987-10
Change the power set. x
Info
The engine sprocket, rear sprocket, and chain should always be replaced
together.
of 18 chain links in the lower chain section.
B
Info
Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.
at the longest
B
is greater than the specified measurement:
B
Replace the chain.
x
Info
When the chain is replaced, the rear sprocket and engine sprocket
should also be changed.
New chains wear out faster on old, worn sprockets.
.
A
15 kg (33 lb.)
272 mm (10.71 in)
81