KTM 690 SMC R EU Owner's Manual page 103

13 WHEELS, TIRES
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Replace the wheel bearing.
–
Remove the bushing
seal ring
2
Long-life grease (
–
Clean and grease the thread of the wheel spindle and nut
Long-life grease (
601904-10
–
Install the rubber damper and rear sprocket carrier in the rear wheel.
–
Position the rear wheel.
The brake linings are correctly positioned.
x
. Clean and grease the roll surfaces of the bushing and the shaft
1
.
p. 179)
p. 179)
101
.
3