Adjusting The Volume - JVC RX-884RBK Instructions Manual

Basic Operations
From the remote control:
Press one of the source selecting buttons directly.
DVD Selects the DVD player.
VCR1 Selects the video component connected to the VCR1
jacks.
VCR2 Selects the video component connected to the VCR2
jacks.
VIDEO Selects the video component connected to the
VIDEO jacks.
CD* Selects the CD player.
TAPE/MD* Selects the cassette deck or the MD recorder.
PHONO* Selects the turntable.
FM/AM* Selects an FM and AM (MW/LW) broadcast.
Each time you press the button, the band alternates
between FM and AM (MW/LW).
TV/DBS • Selects TV sounds when the remote control selector is set to "AUDIO/
TV/VCR."
• Selects the DBS tuner when the remote control selector is set to
"CATV/DBS."
Selecting different sources for picture and sound
You can watch picture from a video component while listening to sound from another
component.
On the front panel:
1. Press SOUND SELECT briefly while viewing the picture
from a video component such as the VCR or DVD player,
etc.
"SOUND SELECT" appears on the display.
2. Turn SOURCE SELECTOR to select the sound (except the
TV sound), while the indication of the above step is still on
the display.
From the remote control:
Press one of the audio source selecting buttons (CD, TAPE/MD, PHONO, FM/AM),
while viewing the picture from a video component such as the VCR or DVD player, etc.

Adjusting the Volume

On the front panel:
To increase the volume, turn MASTER VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
When you turn MASTER VOLUME rapidly, the volume
level also changes rapidly.
When you turn MASTER VOLUME slowly, the volume
level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
15
Note:
When you press one of the
DVD VCR1 VCR2 VIDEO
source selecting buttons
marked above with an asterisk
CD TAPE/MD PHONO FM/AM
(*), the receiver automatically
TV/DBS
turns on.
Notes:
• Once you have selected a
video source, pictures of the
selected source is sent to the
TV until you select another
SOUND SELECT
video source.
• When you select TV sound as
INPUT ATT.
the source, this function does
not work.
SOURCE SELECTOR
CAUTION:
Always set the volume to the
MASTER VOLUME
minimum before starting any
–
+
source. If the volume is set at its
high level, the sudden blast of
sound energy can permanently
damage your hearing and/or
ruin your speakers.
Note:
The volume level can be
adjusted within the range of "0"
(minimum) to "90" (maximum).