Table of Contents
Advertisement
Adjusting the Volume and Tone
Adjusting the Volume
Using the MASTER
VOLUME Control
VOLUME.
1 418 18 yy
"
1
Use the MASTER VOLUME control to adjust the volume from the left and right speakers.
Rotating the dial to the right increases the volume. The volume from the speakers and the
headphones increases simultaneously.
NOTE:
Volume can also be adjusted using the remote control. Press the VOLUME
button marked + to increase the volume, or the VOLUME button marked — to
decrease the volume.
A\ CAUTIONI Listening to extremely loud sound may damage your hearing. Be
especially careful when using headphones.
Muting the Sound
Press the FADE MUTING button on the remote control to decrease the volume easily when you
receive a phone call or a visitor.
FADE MUTING
IMPORTANT! If you are listening at very high volume, you may need fo press FADE
MUTING a second or third time to reduce volume completely.
Selecti ng the Speakers
Pushing in SPEAKER button 1 or 2 activates that pair of speakers. Pressing either button again
deactivates that pair of speakers. When the button is in, that pair is activated. You can listen
Soeeenane;
to both pairs, pair 1, pair 2, or neither pair.
oO oO
IMPORTANT! If only one set of speakers is connected, pressing "in" both speaker
sone
buttons will produce no sound.
Listening to Headphones
Insert the headphone plug into the PHONES jack. To limit sound to the headphones (no sound
from the speakers), press SPEAKER buttons 1 and 2 to deactivate all speakers.
PHONES
O
AX CAUTION! To avoid hearing damage, turn the volume down before plugging in
the headphones, then gradually increase the volume.
Adjusting the Left-Right
Use the BALANCE control to adjust the balance between the left and right channels. Rotating
Balance
the dial to the right increases the right-channel volume, and rotating it to the left increases the
left-channel volume. The BALANCE control affects both sets of speakers and the headphones,
BALANCE
LEFT
10
10
~RIOHT
Page 19
Advertisement
Table of Contents
