JVC RX-884RBK Instructions Manual page 44

Using the DSP Modes
4. Adjust the effect level.
1) Press BALANCE/SURROUND ADJUST repeatedly
until "DSP EFFECT" appears on the display.
2) Turn MULTI JOG to select the effect level, while the
indication of the previous step is still on the display.
As you turn it, the effect level changes as follows:
DSP EFFECT 1 DSP EFFECT 2
DSP EFFECT 5
As the number increases, the selected DAP mode
becomes stronger.
To cancel the DAP mode
Turn MULTI JOG until "DSP OFF" appears in step 2.
The DSP indicator goes off from the display.
From the remote control:
1. Press SURROUND MODE repeatedly until the mode you
want appears on the display.
The DSP indicator also lights up on the display.
Each time you press the button, the DSP modes change as follows (the indicator
of the selected DSP mode also lights up on the display):
PRO LOGIC
OFF
3D THEATER
When the digital input is selected to play the source encoded with Dolby
Digital:
DOLBY DIGITAL
OFF
If you need to make any adjustment, go to the following steps.
2. Press SOUND CONTROL.
10 keys are activated for sound adjustments.
3. Adjust the speaker output levels as follows:
• To adjust the left rear speaker level, press REAR•L +/–.
• To adjust the right rear speaker level, press REAR•R +/–.
4. Press EFFECT to select the effect level.
Each time you press the button, the effect level changes as
follows:
DSP EFFECT 1
DSP EFFECT 5
As the number increases, the selected DAP mode becomes
stronger.
To cancel the DAP mode
Press SURROUND MODE repeatedly until "OFF" appears.
The DSP indicator goes off from the display.
39
DSP EFFECT 3
DSP EFFECT 4
THEATER LIVE CLUB
3D DRAMA 3D ACTION
DIG-THEATER
3D DIGITAL
HEADPHONE
DSP EFFECT 2
DSP EFFECT 3
DSP EFFECT 4
BALANCE/SURROUND
ADJUST
MULTI JOG
SURROUND
MODE
DANCE CLUB
HALL
PAVILION
HEADPHONE
SOUND
CONTROL
REAR R
ENTER REAR L
8 9
5 6
EFFECT
7
/P
Note:
Once you have adjusted the
DAP modes, the adjustment is
memorized for each DAP mode.
Note:
The DAP mode is not used with
the other DSP modes such as
the 3D-PHONIC mode and the
Surround mode. When the DAP
mode is turned on, the other
DSP mode, if used, will be
turned off.
Note:
When you select
"HEADPHONE," you cannot go
to the following steps. No
adjustments can be made for
"HEADPHONE."
Note:
You cannot adjust the rear
speaker levels when "REAR
SPK" is set to "NONE" (see
page 20).
Note:
Once you have adjusted the
DAP modes, the adjustment is
memorized for each DAP mode.