Chest Clip; Hugs™ Chest Pads; Harness Buckle; Adjusting Harness Slot Height - Britax Marathon Classic User Manual

Car seat
Hide thumbs Also See for Marathon Classic:
Table of Contents

Advertisement

Child Seat Functions

Chest Clip

Fastening the Chest Clip
Fasten the chest clip by pushing the two halves
together until a positive click is heard (Fig. A).
Releasing the Chest Clip
1 Squeeze the middle tabs together (Fig. B).
2 Pull the two pieces apart.
Adjusting the Chest Clip
1 Slide the chest clip up or down (Fig. C) on the
harness so it is positioned at the middle of the
child's chest, level with the child's armpits.
2 Slide the HUGS
chest pads and comfort pads
to a comfortable location for the child.
HUGS™ Chest Pads
WARNING!
HUGS
chest pads must
be installed for forward-facing use. Removal of
HUGS is optional only for rear-facing use.
34

Harness Buckle

Fastening the Harness Buckle
1 Hold the harness buckle with one hand.
2 Use your other hand to insert one buckle tongue
at a time into the harness buckle (Fig. D).
• A proper connection is confirmed with a positive
A
Releasing the Harness Buckle
1 Brace the rear of the harness buckle with one
hand.
2 Use your thumb to press the release button and
slide both buckle tongues to remove from the
buckle (Fig. E).
IMPORTANT: Periodically clean the harness buckle to
ensure safe operation (page 41).
b

Adjusting Harness Slot Height

IMPORTANT: See Important Harness Adjustments on
pages 6–7 for instructions on proper harness fit based
on your child's height and weight.
1 Loosen the harness by lifting the harness adjuster
lever while pulling the harness straps forward as
far as possible (Fig. F).
C
2 From the rear of the child seat, unhook the shoulder
straps from the harness yoke (Fig. G).
3 Pull the harness straps through the shell, foam,
and cover to the front of the child seat.
4 Thread the harness straps through the appropriate
harness slots in the cover, foam, and child seat
shell (Fig. H).
5 Reattach the harness straps to the harness yoke
(Fig. G).
6 Pull the harness-adjuster strap to tighten the
harness.
7 Verify that all straps are threaded at the same
height and are not twisted.
click after inserting each buckle tongue.
Child Seat Functions
d
x 2
e
F
G
h
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents