Pid/Data Monitor And Record; Odometer-Data Transfer - Mazda 2006 MX-5 Service Highlights

TACHOMETER
SPEEDOMETER

PID/Data Monitor and Record

• The PID/data monitoring items for the instrument cluster is as shown in following the table:
Monitor item table
Monitor item
IC_DTC_CNT
IC_ECT
IC_NUMKEYS
IC_ODO_CNT
IC_SPDMTR
IC_TACHO
IC_VPWR

Odometer-data Transfer

• If all the following conditions are met, the odometer data (total traveled distance) in the previous instrument
cluster is automatically transferred to a new instrument cluster during the configuration. If any of the conditions
are not met, odometer-data transfer cannot be performed.
Previous instrument cluster
— No malfunction (Configuration data can be read using the WDS or equivalent.)
New instrument cluster
— Odometer display is less than 100 km
— Odometer has no malfunction
Note
• If the odometer display of a new instrument cluster is 100 km or more, an error is displayed on the WDS
after the configuration is completed. In this case, the configuration data for items other than the odometer
are transferred to a new instrument cluster.
End Of Sie
INSTRUMENTATION/DRIVER INFO.
WARNING AND
BUZZER
INDICATOR LIGHT
FUEL
GAUGE
MICROCOMPUTER
INSTRUMENT CLUSTER
Input-output signal/part
name
Number of continuous DTCs
Water temperature gauge
Number of key ID numbers
registered with the vehicle
Odometer
Speedometer
Tachometer
Power supply voltage
WATER
TEMPERATURE
GAUGE
OIL PRESSURE
GAUGE
Unit/State
—
°F °C
—
m
MPH KPH
RPM
V
ILLUMINATION
LCD
LIGHT BULB
E5U922ZS5005
—: Not applicable
Terminal
—
1J, 1L
09–22
—
1J, 1L
1C
09–22–9