Replacing The Bean Hopper; Automatic Cleaning - Baratza VARIO-W Operation Manual

Replacing the Bean Hopper

To replace the bean hopper, line up the two small tabs on the base of the hopper
with their respective slots in the top of the grinder housing and insert the
hopper into the grinder. Once the hopper is in place, rotate it clockwise until it
clicks to a stop (about ¼ inch or 4mm).

Automatic Cleaning

A thorough, fast, and easy cleaning
can be accomplished using Full
Circle(tm) biodegradable grinder
cleaning tablets. Full Circle tablets are
designed to dislodge coffee particles
and absorb and remove odors and
coffee oil residue. Remove all beans
from the hopper and run the grinder
to remove any beans inside. Place the
recommended amount of Grindz into
the empty grinder hopper. Adjust the
grind setting to 10, place the grounds
bin on the load cell and press the
START button. Grind all of the tablets
into the bin, then press STOP. Once
complete, we recommend grinding
approximately 30g coffee to remove
any tablet residue. Discard the ground
tablets/coffee. For information on Full
Circle cleaning tablets, go to www.
urnex.com.
VARIO-W Manual
TM
16