Care And Cleaning; Removing The Bean Hopper; Removing The Upper Burr - Baratza VARIO-W Operation Manual

CARE and CLEANING

Removing the Bean
Hopper
Rotate the hopper lever, so it is in the
CLOSED position, then press the START
button to run any remaining beans
through the grinder. Remove the plug
from the power outlet. Remove the
hopper by twisting it, with both hands
(with the lid on) in a counterclockwise
direction until it stops (about 1/4inch,
Rotate Baratza burr tool clockwise to
remove the burr carrier.
or 4mm) and then lift the bean hopper
off of the grinder housing.
Removing the Upper
Burr
Using the Baratza Burr Tool included
with the grinder, rotate the metal burr
carrier clockwise about 1/6th of a
turn, then lift the burr carrier straight
up and out of the grinder housing. You
may need to wiggle the burr carrier a
little to get it free.
Rotate burr carrier counter clockwise
to lock in place.
VARIO-W Manual
TM
14