Sleep Mode; Burr Calibration - Baratza VARIO-W Operation Manual

Each button comes from the factory
with the following presets:
Weight: 1=15g, 2=30g, 3=60g
You can easily program more or less
grinding weight as follows:
1. Select a Preset button.
2. Press the up or down arrow
buttons to adjust the weight.
(Press and hold the up or
down arrow for two seconds )
3. Once you have reached the
desired weight setting, press
and hold the preset button for 3 seconds. The setting will blink to
confirm the setting is stored.
4. To program the other buttons repeat steps 1-4.
If the grinder is unplugged it will retain the stored settings

Sleep Mode

To minimize standby power consumption, the VARIO-W will go into "sleep mode"
automatically after 3 minutes of non-use. While in sleep mode, the screen goes
blank. To "wake up" your VARIO-W, press any button. Once the screen lights up,
select your grinding method.

Burr Calibration

All directional indications assume you are looking down on the machine.
A 2mm Allen head calibration screw is located in the round hole behind the
discharge chute (see photo). This calibration screw allows the user to easily fine-
VARIO-W
11
Manual
TM