Operation; Normal Grinding Operation - Baratza VARIO-W Operation Manual

Place the VARIO-W grinder on a level surface. With the hopper lid in place,
mount the hopper on the grinder housing by lining up the two small tabs at the
base of the hopper with the two slots inside the collar on the top of the grinder.
The Open/Closed lever should be oriented to the back of the grinder.
Picture hand placing hopper on
housing.

Normal Grinding Operation

Move the Macro lever (right side) up or down, to the desired grind setting. Set
the Micro adjustment lever (left side) to the middle of the scale.
Starting brew settings can be found at www.baratza.com under the Support
tab.

OPERATION

Turn the hopper clockwise until it
locks into position (expect to apply
force).
Insert the power plug into an AC outlet.
Pour the desired quantity of roasted,
whole coffee beans into the hopper.
Center the ground coffee bin in front of
the grinder and slide it carefully onto
the load cell platform. Avoid excess
weight or pressure on the load cell.
Press one of the preset buttons, then
press START.
VARIO-W
9
Manual
TM