Baratza VARIO-W Operation Manual page 13

Weight-based grinder

Hide thumbs Also See for VARIO-W:

Table of Contents

Scale Calibration

If the display is showing "EEE", "out" or the grinder is over or under-dosing

coffee, the scale needs to be calibrated. To do this you need a 200g weight. To

"create" a 200g weight, place the Vario-W grounds bin on a separate scale and

add whole coffee beans until the scale reads 200g (combined weight of bin and

beans). Keep your "200g weight" handy. Now, unplug the Vario-W and make

sure there is nothing on the scale platform. Plug the Vario-W back in, and while

it powers on, hold buttons 1 and 2, until a value between 300-600 is displayed.

Then press button 1, the display will read "cal". Gently set the 200g weight onto

the platform. The display will flash "pas" and then show the total weight of the

bin and coffee beans (it

should read 200). After

removing the bin the

screen will show 0.0.

Empty

Then press START to

bring the grinder to

the

"home

Then place the bin

back on the scale and

press TARE. The scale

now

Please email us at

support@baratza.com

if you have problems

calibrating the scale.

VARIO-W

the

beans.

screen".

calibrated.

Manual

Table of Contents