Care & Cleaning - Baratza Encore Operation Manual

®
CARE & CLEANING
REMOVING THE HOPPER
Remove all coffee beans from the hopper and grind any remaining beans through using either the On/Off switch or
the pulse button. Unplug the grinder from the power outlet before removing the hopper.
counterclockwise so that the grind setting indicator is aligned with the triangle near grind setting 40. Lift the hopper off of the
grinder.
REMOVING THE RING BURR
Ensure that the grind adjustment ring is turned fully counter-clockwise. Use the grind adjustment tabs to turn the adjustment
ring. The red indicator on the burr lifting tabs should be aligned with the red indicator on the grind adjustment ring. The ring
burr can be removed by lifting straight up while gripping the ring burr lifting tabs. Ensure that the hopper gasket is not lost in
the process.
CLEANING THE GROUNDS BIN, HOPPER & BURRS
Wash the grounds bin, hopper, hopper lid, and hopper gasket in warm, soapy water. Rinse and let air dry.
burr to get wet, otherwise it will rust.
If the grinder is used daily, the burrs should be brushed off regularly (about once a month) with the included brush. If dark,
oily coffee or flavored coffee is used, grinder cleaning tablets may need to be used in order to absorb the oils and scent
left behind by the coffee. If oil is left to build up in the grinder, it may become clogged, resulting in damage to the grinder.
Please follow manufacturer recommendations for grinder cleaning tablet use.
cleaning tablets to clean the internals of the grinder.
Caution: Do not put the hopper, hopper lid or grounds bin in the dishwasher. Hand wash only. Do
not immerse the grinder housing in water. Do NOT wash the burrs with water, or they will rust.
December 2022 (v4.3)
ENCORE OPERATIONS MANUAL
Rotate the hopper completely
Do not grind any substance other than grinder
Do not allow the ring
7