HP Pavilion 15 Maintenance And Service Manual page 95

Description
Display panel cable (includes webcamera/microphone module cable and two rubber screws)
Antenna Kit (includes left and right wireless antenna cables and transceivers and 2 rubber screws)
Display Hinge Kit (includes 2 rubber screws):
Display enclosure (includes 2 rubber screw covers):
In pearl white finish
In sparkling black finish
In flyer red finish
In revolutionary blue finish
In regal purple finish
In aluminum metal finish
In mineral black finish
In Goji berry finish
In hazel berry finish
In raspberry finish
NOTE: The display assembly is spared at the subcomponent level only. For more display assembly spare
part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Optical drive (see
b. Service door (see
c. WLAN module (see
d. Memory module (see
e. Keyboard (see
f. Top cover (see
g. Hard drive (see
h. System board (see
Remove the display assembly:
1. Remove the three Phillips M2.5×6.5 screws (1) and (2) that secure the display assembly to
the base enclosure.
Battery on page 40), and then remove the following components:
Optical drive on page
Service door on page
WLAN module on page
Memory module on page
Keyboard on page 51).
Top cover on page 55).
Hard drive on page 59).
System board on page
45).
42).
44).
42).
68).
Component replacement procedures
Spare part number
732066-001
732063-001
732072-001
725611-001
725612-001
725613-001
725614-001
725615-001
732064-001
737166-001
737167-001
737168-001
737169-001
85