List Of Technical Publications - Juniper J4300 Installation Instructions Manual

J4300 and J6300 Services Router PIM Installation Instructions
4.
5.
6.
7.
8.
Figure 2: Installing a PIM

List of Technical Publications

Table 1 lists the software and hardware guides and release notes for Juniper
Networks routing platforms that use the JUNOS Internet software and describes
the contents of each book.
4
List of Technical Publications
Tighten the captive screws on each side of the PIM faceplate.
Insert the appropriate cables into the cable connectors on the PIM.
If necessary, arrange the cables to prevent them from dislodging or developing
stress points:
Secure the cable so that it is not supporting its own weight as it hangs
to the floor.
Place excess cable out of the way in a neatly coiled loop.
Use fasteners to maintain the shape of cable loops.
Press and release the power button to power on the router. Verify that the
LED lights steadily after you press the power button.
POWER ON
Verify that the PIM status LED lights steadily green to confirm that the PIM
is online.
You can also verify correct PIM functioning by issuing the
command described in the JUNOS Protocols, Class of Service, and
pic-status
System Basics Command Reference.
AL AR M
O N
PO W ER
ST AT US
1
G PO RT
C O N FI
ST AT US
0
PO RT
show chassis fpc