Removing The Seat; Mounting The Seat - KTM 690 Enduro R USA 2013 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.9

Removing the seat

11.10

Mounting the seat

–
Hook slot of the seat onto screw
1
–
Push locking pin into lock housing
3
–
Finally, check that the seat is correctly mounted.
–
Pull on strap
–
Pull back the seat and lift it off.
601772-10
, press the rear downward and at the same time push it forward.
2
and push the back of the seat down until the locking pin locks in place with an audible click.
4
and raise the rear of the seat at the same time.
1
601782-10
84