51
WFMC6400 Service Tips
WFMC6400 Service Tips
Flow sensor
The flow sensor measures the volume of (cold) water
flowing into the detergent dispenser. It consists of an
impeller wheel with a magnet core and a Hall integrated
circuit.
When the wheel rotates, the magnet emits
impulses to the Hall IC.
The water flow is marked by an arrow on the side of the
sensor.
Specifications:
• Voltage:
• Detected flow rate:
NOTE: If there's air bubbles in the water, higher flow
rates may be detected.
Water flow arrow
12 VDC
0 – 10 liters/minute
HINT:
water flow arrow points
from the water inlet valve
to the dispenser.
--
--
Make sure the
Water Flow Meter
Water Flow Meter
1st Edition/Revision 6 (2/2/04)