Bosch WFMC3200UC Training Manual page 45

45
WFMC Service Tips
WFMC Service Tips
Drain pumps reliably pump water out from washer
tubs through the drain reservoir and drain hose.
Unlike earlier washers,
maintenance free -- access to remove debris is
only meant for servicers.
To remove the drain pump access cover,
HINT:
insert a pointed object (or tool) into the hole, push in
to release the latch and rotate the cover clockwise.
NOTE: There's no provision for draining residual water from drain pumps.
these pumps are
-- Drain Pump
-- Drain Pump
NOTE: Drain pump motor resistance
ranges from 140 – 200Ω.
HINT: Drain pumps are mounted on four rubber
feet to dampen vibration & noise. To remove
drain pumps, carefully slide them toward rear of
washers. To install them, carefully insert all four
feet into notches in washer base, then slide
them forward.
Current production pumps are beige
color – earlier pumps were black.
1st Edition/Revision 6 (2/2/04)