Installing and removing an accessible 3
drive (e.g. diskette drive)
► Open the casing (see
Floppydisk drive,
Floppydisk drive,
► Disconnect all cables connected to the drive (data cable, power supply cable).
► Remove the screws (1).
► Working from behind, slide the floppy disk drive out of the bay in the direction of the arrow (2).
► Slide the new floppy disk drive into the casing as far as it will go (1).
► Fasten the floppy disk drive with the screws (2).
► Fit the data and power supply connectors to the floppy disk drive. Make sure the polarity is correct.
A26361-K1182-Z120-1-7619, edition 3
"Opening the casing", Page
2
1
1
/
inch
2
37).
1
2
System expansions
55