Connecting The Monitor - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

Getting started

Connecting the monitor

► Follow the instructions contained in the monitor manual to prepare the monitor
for operation (e.g. connecting cables).
Monitor,
► Connect the data cable of the monitor into the monitor port of your device.
The monitor power cable may only be connected to the device monitor socket if
the monitor current consumption is less than 1.5 A for 230 V or 3 A for 115 V.
The values for the monitor current consumption can be found in the technical
data on the monitor or in the operating manual for the monitor.
► Depending on your device configuration level, plug the monitor power cable into
either the system unit (1) or a grounded mains outlet (2).
12
1
2
A26361-K1182-Z120-1-7619, edition 3