Configure Device; Configuring With Serverstart Or Easysetup; Configuration Without Serverstart - Fujitsu Siemens Computers Primergy Econel 100 Series Operating Manual

Ctrl
Del
Ctrl Alt
+ +
SysRq
Configure device
Configuration
This section contains information about the configuration of the device and
installation of the operating system.
Make sure the energy saving functions are disabled in the BIOS Setup.
Configuring with ServerStart or EasySetup
These applications makes it easy for you to configure the device and then install the operating system.
The menu-driven configuration process includes server configuration with SCU
and RAID controller configuration.
Information about using ServerStart can be found in the "PRIMERGY ServerView
Suite - ServerStart" manual on the "ServerStart" CD.
Further information about using EasySetup is provided on the "Drivers & Utilities" DVD.
Configuration without ServerStart
► First configure the SATA RAID controller (see
► Insert the installation disk and the CD/DVD of the operating system you want to install.
► Restart the device.
► Follow the instructions on the screen and in the manual for the operating system.
► If your device is equipped with a RAID controller, refer to its manual to find out how to
install the desired operating system (see
A26361-K1182-Z120-1-7619, edition 3
Keys, Keys, Keys, Keys,
Ctrl key
performs a special operation when pressed in conjunction with another
key. The Ctrl key is also referred to as "Control" or the "Control key".
keyboardshortcuts Keys, Ctrl+Alt+Del Warmreboot
Warm restart
restarts your device. Press simultaneously the keys
Under some operating systems the Task Manager appears first. You
must then press all three keys again to reboot.
"Information sources", Page
"Configuring the SATA RAID controller", Page
Operation
Ctrl , Alt and Del
3).
.
24).
23