Table of Contents
Advertisement
System expansions
Removing an accessible drive
Ê
Open the system unit (see "Opening the system unit").
1
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2) and take the drive out of the system unit (3).
For cooling, protection against fire and in order to comply with EMC regulations, you must
!
refit the plastic cover.
It may be necessary to modify the entry for the drive in the BIOS Setup.
i
42
Installing and removing drives
2
Ê
Press the plastic drive cover into the front
panel until it snaps in place.
Ê
Close the system unit (see "Assembling
the system unit").
2
3
A26361-K831-Z101-1-7619
Advertisement
Table of Contents
