Removing An Accessible Drive - Fujitsu Siemens Computers PRIMERGY ECONEL 10 Operating Manual

System expansions

Removing an accessible drive

Ê
Open the system unit (see
1
Ê
Pull the data and the power supply connectors from the desired drive (1).
Ê
Remove the screws (2) and take the drive out of the system unit (3).
For cooling, protection against fire and in order to comply with EMC regulations, you must
!
refit the plastic cover.
You may have to check the entry for the drive in the BIOS Setup.
i
38
"Opening the system
2
Installing and removing drives
unit").
Ê
Press the plastic drive cover into the front
panel until it snaps in place.
Ê
Close the system unit (see
the system unit").
2
3
"Assembling
A26361-K831-Z100-1-7619