Rear Fairing Removal/Installation; Fuel Tank Removal/Installation - Honda Nighthawk CB 750 1991 Service Manual

FrameIBody PanelsIExhaust System
Rear Fairing Removal/lnstallation
/
Remove the seat (page 2-3).
Remove the shock absorber upper mounting bolts, collars
and washers.
Remove the fairing mounting screws, collars and washers.
Raise the rear fairing and remove the taillight mounting nuts
and washers.
Remove the rear fairing.
Install the rear fairing in the reverse order of removal
Install the seat (page 2-31
19) REAR FAIRING
I
Fuel Tank Removal/lnstallation
-
Gasoline is extremely flammable and
is
explosive
under certain conditions.
Remove the seat (page 2-3).
Turn the fuel valve OFF.
Remove the fuel tank mounting bolt and lift the fuel tank up,
Disconnect the tubes, and remove the fuel tank.
Install the fuel tank in the reverse order of removal.
After installation, turn the fuel valve ON and check the fuel
line for leakage.
Install the seat (page 2-3)
(1) FUELTANK
( 2 ) BOLT
I
. -
(5) VACUUM TUBE (4) FUELTUBE N O . ~ TUBE
(CALIFORNIA
MODEL ONLY)