Brake Pedal Removal/Installation - Honda Nighthawk CB 750 1991 Service Manual

Brake System
Brake Pedal Removal/lnstallation
Requisite Service
.
Evaporative emission canister removal/installation (California model only.)
Procedure Q'h, Remarks
Removal Order
Installation is in the reverse order of removal.
(1) Brake pedal pinch bolt 1
(2) Brake pedal
1 Align the punch mark on the shaft with the brake pedal slot.
(3) Brake rod adjusting nut
1
(4) Brake rod spring 1
(5) Brake rod joint piece 1
( 6 ) Brake switch spring 1
(7) Brake pedal return spring
1
(8) Brake linkage assembly
-
(9)
-cotter pin
1
(10) -joint pin
1
At assemble, align the cutout of the joint pin with the boss
in the brake rod.
1 1 1 ) -brake linkage
1
Apply clean grease to the sliding surface of the shaft.
(12) -brake rod 1