Frame/Body Panels/Exhaust System Troubleshooting - Honda Nighthawk CB 750 1991 Service Manual

2. Frame/ Body Panels/ Exhaust System
I
I
Service lnformation
a
Service Information
2-1 Side Cover Removal/lnstallation 2-3
Troubseshooting 2-1 Rear Fairing Removal/lnstallation
Exhaust System Removal/lnstallation 2-2 Fuel Tank Removal/lnstallation 2-4
Seat Removal/lnstallation 2-3
I
serviced.
I
a
-
Work in a well ventilated area. Smoking or allowing flames or sparks in the working area or where gasoline is stored can
cause a fire or explosion.
-
This section covers removal and installation of the frame body panels, fuel tank and exhaust system.
-
Always replace the exhaust pipe gaskets when removing the exhaust pipe from the engine.
When installing the exhaust pipe, first install all the fasteners loosely. Next, tighten the exhaust clampsfirst, then tighten
the mounting fasteners. If you tighten the mounting fasteners first, the exhaust pipe not seat properly.
-
Always inspect the exhaust system for leaks after installation.
.
Gasoline is extremely flammable and is explosive under certain conditions. KEEP OUT OF
REACH
OF
CHILDREN.
Serious burns may result if the exhaust system is not allowed t o cool before components are removed or
Troubleshootinn
-
Excessive Exhaust Noise
-
Broken exhaust system
Exhaust gas leak
Poor Performance
.
Deformed exhaust system
.
Exhaust gas leak
.
Clogged muffler