Using Windows Vista; Changing Wireless Settings After Installation - Dell V305 All In One Inkjet Printer User Manual

13. Click Push Button on your router WPS page within two minutes.
If setup is successful, Wi-Fi Protected Setup Successful appears on the printer operator panel.
Check if the printer's Wi-Fi LED turns blue. For more information, see
If setup is not successful or times out, perform
14. Close the router WPS page.
15. Follow the instructions on the installation screen to complete setup.

Using Windows Vista

To configure your printer on the wireless network using WPS, you may use Windows Vista™ instead of the Push-Button or
PIN methods. For more information about using Windows Vista, see the documentation that came with your operating
system.

Changing Wireless Settings after Installation

Configuring the printer using the Wireless Setup Utility involves connecting the wireless printer to a computer by USB
cable, and launching the Drivers and Utilities CD.
If you need to adjust the wireless adapter settings after installation, the CD is not required. Launch the Wireless Setup
Utility.
In Windows Vista:
1. Click ® Programs.
Wi-Fi
step 8 to step 13 again.
LED. Continue with step 14.