Honeywell XYR 6000 Quick Start Manual page 30

3. Process insertion
3.4. Corrosion models
Mounted in Y-Strainer
The probe is shown in the blow down
of a Y-strainer.
Mounted in Basket Strainer
The probe is shown in the discharge
side of the basket strainer.
The electrodes should be selected to reflect the same metal properties as the piping or other components
that might be susceptible to corrosion. For example, in applications where the pipe is made of stainless
steel and the water pump's impeller is made of carbon steel, the impeller will corrode faster than the pipe.
In this case it is advisable to select the electrodes to be the same material as the pump's impeller.
20
Location
OneWireless XYR 6000 Transmitters Quick Start Guide
Picture
Revision 3
8/8/07