Voice Recognition - Chevrolet 2011 Camaro Owner's Manual

7-30 Infotainment System
Bluetooth

(Voice Recognition)

Using Voice Recognition
To use voice recognition, press
the button located on the
steering wheel. The system
responds Ready, followed by
a tone. After the tone, say a
command.
For additional information say
Help while you are in a voice
recognition menu.
Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See your cell phone
manufacturer's user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
using OnStar Hands Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
Pairing Information
Up to five cell phones can be
paired to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones
are within range of the system,
the system connects to the first
available paired cell phone in
the order that they were first
paired to the system. To link
to a different paired phone,
see Connecting to a Different
Phone later in this section.
I n f o r ma t i o n P r o v i d e d b y :
Pairing a Phone
1. Press .
2. Say Bluetooth.
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturer's
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.