Chevrolet 2011 Camaro Owner's Manual page 358

10-84 Vehicle Care
Tools
A. Wheel Wrench
B. Jack Handle Extension
C. Jack
The jack and tools are stored below
the spare tire.
1. Turn the flat end of the jack
counterclockwise to loosen it.
Remove the jack from the
retaining bracket.
2. Remove the tool container.
3. Remove the tools and tire strap
from the tool container.
4. Place the tools next to the tire
being changed.
I n f o r ma t i o n P r o v i d e d b y :
Removing the Flat Tire and
Installing the Spare Tire
1. Do a safety check before
proceeding. See If a Tire Goes
Flat on page 10 74 for more
information.
2. If the vehicle has wheel bolt
caps, remove the caps. Store
the caps with the wheel cover.
3. Use the fully extended
wheel wrench to loosen all
the wheel nuts one-half turn
counterclockwise. Do not
remove them yet.