Chevrolet 2011 Camaro Owner's Manual page 356

10-82 Vehicle Care
11. Press the on/off button (A)
to turn the tire sealant and
compressor kit off.
Be careful while handling the
tire sealant and compressor
kit as it could be warm after
usage.
12. Unplug the power plug (G) from
the accessory power outlet in
the vehicle.
13. Disconnect the air only
hose (E) from the tire
valve stem, by turning it
counterclockwise, and
replace the tire valve
stem cap.
14. Return the air only hose (E)
and the power plug (G) back
to their original locations.
15. Return the equipment to its
original storage location in
the vehicle.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
I n f o r ma t i o n P r o v i d e d b y :
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Screw the connector (B) to the
canister (A).
7. Slide the plastic cover back on.