Display Connection; Connecting To An E-Series Display - Raymarine DSM400 Installation Manual

4. Attach the ground spur to the ground screw on the body of
the sounder unit.

2.8 Display connection

Your DSM400 Digital Sounder Module can be connected to
either E-Series or G-Series display units.
How you configure the sounder module depends on the type of
display to which it is going to be connected. Full details will be
found in the relevant documentation for your display.
System and transducer connections
www.busse-yachtshop.de | info@busse-yachtshop.de
Connections for both E-Series and G-Series displays are shown
in the following diagrams:

Connecting to an E-Series display

DSM400
D10994-1
E series display
Power
GPS
antenna
PAGE
ACTIVE
WPTS
MOB
DATA
MENU
OUT
RANGE
IN
OK CANCEL
D10983-1
23