Trailer Sway Control (Tsc) - Dodge Ram 2010 Owner's Manual

388 STARTING AND OPERATING

Trailer Sway Control (TSC)

The TSC system uses sensors in the vehicle to recognize
an excessively swaying trailer and will take the appro-
priate actions to attempt to stop the sway. The system
may reduce engine power and apply the brake of the
appropriate wheel(s) to counteract the sway of the trailer.
TSC will become active automatically once an excessively
swaying trailer is recognized. No driver action is re-
quired. Note that TSC cannot stop all trailers from
swaying. Always use caution when towing a trailer and
follow the trailer tongue weight recommendations. Refer
to "Trailer Towing" in this section.. When TSC is func-
tioning, the "ESP/TCS Indicator Light" will flash, the
engine power may be reduced and you may feel the
brakes being applied to individual wheels to attempt to
stop the trailer from swaying. TSC is disabled when the
ESP system is in the "Partial Off" or "Full Off" modes.
TSC is only active in the default "ESP On" mode. TSC can
be disabled by pressing the ESP OFF switch and entering
"ESP Partial Off" mode. It is not active in the "ESP Partial
Off" or "ESP Off" modes. Please refer to the ESP portion
of this section for an explanation of the different ESP
operating modes.
WARNING!
If TSC activates while driving, slow the vehicle
down, stop at the nearest safe location, and adjust the
trailer load to eliminate trailer sway.