Setting Memory Positions And Linking Rke; Transmitter To Memory - Dodge Ram 2010 Owner's Manual

110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Keyless Entry (RKE) transmitters can also be pro-
grammed to recall the same positions when the UN-
LOCK button is pressed.
NOTE: The power lumbar option is not programmable
with driver memory seats.
Your vehicle was delivered with two RKE transmitters.
One or both RKE transmitters can be linked to either
memory position. The memory system can accommodate
up to two RKE transmitters, each RKE transmitter linked
to either of the two memory positions.

Setting Memory Positions and Linking RKE

Transmitter to Memory

NOTE: Each time the S (SET) button and a numbered
button (1 or 2) are pressed, you erase the memory settings
for that button and store new settings.
1. Turn the vehicle key to the ON/RUN position.
2. Adjust the driver's seat, recliner, and both sideview
mirrors to the desired positions.
NOTE: Not all motors may be moved at one time. Refer
to the eight-way power seat description in this section.
3. Adjust the brake and accelerator pedals to the desired
positions.
4. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).
5. Adjust the Automatic Temperature Control (ATC)
while the ATC is in Auto mode.
6. Press and release the SET button located on the
driver's seat.
7. Within five seconds, press and release MEMORY
button 1 or 2 on the driver's seat. The next steps must be
performed within 10 seconds if you desire to also use a
RKE transmitter to recall memory positions.