Transfer Case Position Indicator Light; Electronically Shifted Transfer Case (Four-Position Switch) - If Equipped - Dodge Ram 2010 Owner's Manual

Dodge ram 2010
Hide thumbs Also See for Ram 2010:
Table of Contents

Advertisement

314 STARTING AND OPERATING
method is with the vehicle rolling 2 to 3 mph (3 to
5 km/h). Avoid attempting to engage or disengage 4L
with the vehicle moving faster than 2 to 3 mph (3 to
5 km/h).
• Do not attempt to shift into or from 4L while the
transmission is in gear.

Transfer Case Position Indicator Light

The "Transfer Case Position Indicator Light" in the
instrument cluster is used to alert the driver that the front
axle is fully engaged and all four wheels are driving.
Electronically Shifted Transfer Case
(Four-Position Switch) — If Equipped
This is an electronic shift transfer case and is operated by
the 4WD Control Switch (Transfer Case Switch), which is
located on the instrument panel.
Transfer Case Switch (Four-Position)
This electronically shifted transfer case provides four
mode positions:
• Two-wheel drive high range (2WD)
• Four-wheel drive lock range (4WD LOCK)
• Four-wheel drive low range (4WD LOW)
• Neutral (NEUTRAL)

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 ram

Table of Contents