Rimage Desktop 360i Setup And Installation

If you are unfamiliar with the procedures in this document, ask your
computer technician for help or refer to your PC documentation.

Before you begin:

• You must have administrative privileges to install and operate the
Rimage 360i software on your PC.
• Do not plug in any cables until you are instructed to do so.
• Obtain a computer than meets the PC specifications listed in the
'Learn more' section of your Rimage 360i User Guide.
110809_B
1
Install the Rimage 360i software.
a. Power on your PC.
b. At your PC, insert the
Rimage 360i Software
disc in the
PC disc drive.
c. Follow the onscreen prompts to complete the installation.
In Windows 2000, a warning message that the software
you are about to install does not contain a digital signature
displays. To install the software, select Yes.
In Windows XP, a warning message that the software has
not passed Windows Logo testing displays. To install the
software, select Continue Anyway.
d. When the Installation Status screen displays Rimage
software was successfully installed, select Finish.
2
a. Connect the USB 2.0 cable from the Rimage 360i to your PC
USB 2.0 port.
b. Connect the power cord
from the Rimage 360i to
the power outlet.
1