Operation
4.3
Lens Adjustments
Focus
Zoom
Vertical and Horizontal
Lens Shift
To access the motorized lens controls, select Display Device from the Service Menu, then
select Lens from the Display Device menu. The Lens menu gives you a great deal of
control over the picture size, position and focus:
To focus the projected image, use the cursor buttons to highlight "In" or "Out." Then,
press and hold the ENTER button.
To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
(-). Then, press and hold the ENTER button.
To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+).
Then, press and hold the ENTER button.
Lens Shift -- VX-2c: To change the projected image position, use the cursor buttons to
highlight "Left," "Right," "Up" or "Down" in the Lens manu. Then, press and hold the
ENTER button to shift the image in that direction.
Lens Shift -- VX-2dc: To change the projected image position, use the lens adjustment
tool provided with the VX-2dc to shift the lens in the desired direction; see Figure 4-1. The
vertical lens shift control is at the top of the projector; the horizontal lens shift control is on
the side of the projector nearest the Runco logo.
Vertical Lens Shift
Horizontal Lens Shift
Figure 4-1. VX-2dc -- Vertical and Horizontal Lens Shift Adjustments
36
Runco VX-2c/VX-2dc Owner's Operating Manual