Speed Dial; Do Not Disturb - Iwatsu Enterprise C5 Quick Reference Manual

Multi-Line (Up To 3 Outside + 1 Inside, Or 2
Outside + 2 Inside)
While speaking on an outside call:
• Quickly press and release
button
• Dial the Hold code to put the outside line on
hold
• After you hear the confirmation tone, access the
second outside line and call the other outside
party
• After the second outside line has answered
quickly press and release
button
• When you hear the
Conference code
• All three parties are connected
To add a third outside line repeat the same
procedure.
Trunk-To-Trunk (2 Outside Parties Only)
When you are speaking with two outside parties in
a multiline conference call:
• Quickly press and release
button
• When you hear the tone dial the Conference
code, hang up
The two outside parties will still be in a conference.
To return to the multiline conference call:
• Lift the receiver
• Dial the Hold Pick Up code
You are automatically reconnected
conference.
Paging
• Lift the receiver
• Dial the Paging Code *
• Speaking into the receiver make your
announcement
• Hang up
7
ECS_SLT_QRG_7.06.05
pages 8 and 9
the receiver
the receiver
tone, dial the
the receiver
to the

Speed Dial

To Register Personal Speed Dial Numbers
• Lift the receiver
• Dial the Speed Dial Registration code
then dial the Personal Speed Dial Code
( - )
• Enter the desired outside line group access
code *
• Enter the phone number
• Hang up
To Register a Pause Time
To register a pause within a speed dial number dial
and the desired pause time in seconds (1-9).
To Register a [*]
When registering the telephone number, at the
place where you want to insert a [*], dial
• This code is programmed by your system
administrator
To Speed Dial A Number
From A Touch Tone Phone
• Lift the receiver
• Press , then dial the Speed Dial Code for
the number you want to call
The system automatically dials the registered
number.
From A Rotary Dial Phone
• Lift the receiver
• Dial the Speed Dial Access code
• Dial the Speed Dial Code for the number
that you want to call
The system automatically dials the registered
number.

Do Not Disturb

If you do not wish to be disturbed, you can set your
extension to prevent any calls from getting through
or ringing on the phone.
• Lift the receiver
• Dial the Do Not Disturb code
• When you hear the confirmation tone, hang up
To cancel Do Not Disturb:
• Lift the receiver
• Dial the Cancel code and the Do Not
Disturb code
• When you hear the confirmation tone, hang up
8
Thursday, July 21, 2005 09:35
Composite