Network Setup; For A Wired Connection - Topfield TRF-2470 User Reference

Whenever a new dynamic IP address is assigned to the router,
it will inform the DDNS service provider of the new IP ad-
dress. This makes it possible that you access the router with a
domain name at any time.

9.2 Network setup

9.2.1 For a wired connection

which should be supported by your router.
2. Configure your router with the account so that it can
communicate with the web site.
1. Connect your Ethernet cable from your router to the Top-
field recorder.
2. Press Installation > Network Setting > IP Setting.
3. Select Wired/Wireless LAN. Then select Wired as the pre-
ferred connection.
4. It is recommended to use a dynamic IP address by the
router therefore select DHCP as the connection type.
However if a static connection is set then please refer to
your router for an IP address, Subnet Mask, Gateway,
Primary DNS, Secondary DNS.
5. Once a connection has been set scroll down to activate
profile and press the OK button on the remote.
6. A successful connection will populate all the IP settings
and the Level/Quality bars on the TV screen will show
a high percentage level.
9.2 Network setup 77